Assembly - Community Playthings PlayFrame Anleitung

Assembly

The PlayFrame must be assembled by adults. The steps below will help you set up your
PlayFrame quickly and safely.
Mats
If using PlayFrame mats, we recommend laying them down first with no gaps
•
between them, and then erecting the PlayFrame on top of the mats. (Mats other
than PlayFrame mats may not be firm enough to allow this.)
Ensure that the mats extend at least 1 meter all around the PlayFrame.
•
The PlayFrame Square
The Square consists of 2 pairs of panels and 2 platforms.
•
Unfold the panels and stand them in a square.
•
Connect the panels:
•
1
Insert the yellow peg on the bottom
hinge into the corresponding hinge on the
adjacent panel.
Ensure top and bottom hinges are latched at two corners of your PlayFrame.
•
4
2
Use a key or similar tool to raise the yellow
button on the top hinge.
3
Line up the top hinges of adjacent panels and
release the yellow button to latch.
communityplaythings.co.uk