Dolby Surround Pro-Logic Decoder; Unpacking; Controls - AKG HEARO 888 TITAN Bedienungsanleitung

LH FILTER
RH FILTER
The Dolby Surround Pro-Logic decoder integrated in the transmitter uses the stereo input
signal to derive two additional signals, a center and a surround channel. The IVA circuitry
generates from these signals a binaural signal equivalent to reproduction through five high
quality loudspeakers (3 front, 2 rear speakers). This allows you to enjoy all the benefits of
Dolby surround sound even through headphones.
Your headphones system comprises the following components:
1 pair of headphones
1 transmitter with integrated battery charger
2 stereo connecting cables with gold plated connectors for linking the transmitter to your
audio source: 1 RCA cable, 1 jack cable (mini jack to 2 x RCA connectors)
1 mini jack/1/4" jack adapter
1 AC adapter for powering the transmitter
2 1.2 V AAA size NiMh rechargeable batteries for powering the headphones (inside the
headphones)
If anything is missing, contact your AKG dealer immediately.
1. POWER switch
2. Green POWER indicator LED
3. Charging contacts
4. Battery compartment (beneath the ear pad)
5. TUNING: frequency fine tuning control
6. VOLUME control
8 9
7. CHARGE: This tri-color LED indicates charging and operating modes
8. ON: Switches power to the transmitter ON and OFF (to the right).
9. INPUT LEVEL: This bi-color LED indicates the signal level at the transmitter input.
When the level is in the optimum range, the LED will light green intermittently to con-
stantly. When the input stage is overloaded, the LED will light red.
C: Listening through headphones with IVA processing:
The ear matching function modifies the audio signals
at the ears to resemble diagram A. This restores
natural, spatial hearing.
7 14
2 Description
10 13 11 12
2.3 Dolby Surround
Pro-Logic Decoder

2.4 Unpacking

2.5 Controls

2.5.1 Headphones
2.5.2 Transmitter
Front Panel
13