Problems And Solutions - Lanaform Lily Betriebsanleitung

Storage:
EN
Clean and dry the ultrasonic humidifier carefully, complying with the maintenance instructions.
Let it dry completely before storing it. Do not store with water in the base.
Store the appliance in a dry cool place, out of the reach of children.

PROBLEMS AND SOLUTIONS

No wind, no mist
Wind, but no mist
Strange mist smell
Too little intensity
The mist does not rise
Noise
6
Problem
No electric current
Main switch closed
The water level in the groove is too
high
Leak in the water tank
No water in the tank
The water level indicator is not in the
right position
The temperature of the unit is too
low
Water has beens stagnating too long
in the tank
Too much water in the groove
Mist adjustment is set at a minimum
Sediment on the transducer
Water too cold
Water is not clean
The mist intensity is set at minimum
The tank and the base are not
perfectly matched
The ventilator does not function
correctly
Resonance due to a low level of water
in the tank
Resonance due to an unstable surface Place the unit on a stable surface
Possible causes Solutions
Plug in the appliance
Turn on main switch
Remove water from the groove
Close the lid properly
Fill the tank
Correctly reposition the water level
indicator
Put the unit in a room at ambient
temperature for half and hour before
use
Clean the tank and add clean water
Empty water from the groove and put
the tank back
Adjust intensity adjustment knob
Clean the transducer
Use water at ordinary temperature
Clean the tank and add fresh water
Adjust the intensity
Correct this
Ask a professional to verify the
ventilator in the base
Add water in the tank