Intermec PW50 Installationsanleitung Seite 4

Items Not Provided
•
•
•
Installing the Vehicle Mount
1 Use the four hex screws and the hex key to attach the RAM
2 Use the four 1/4-inch-flathead hex screws and nuts to attach
4
Power cord. You need to purchase the appropriate power
cord separately. For help, contact your Intermec sales
representative.
Common hand tools.
Electric drill and drill bits.
vehicle mount base to the vehicle mount.
the RAM vehicle base to your vehicle. Make sure to install the
vehicle mount in a location that is easily within reach for
accessing and removing the PW50 Workboard Printer.
Vehicle
mount
RAM vehicle
mount base
Hex screw
(4 places)