Axis 213 Installationsanleitung Seite 5

AXIS IP Utility
AXIS IP Utility is a free Windows
application that discovers and
displays Axis devices on your
network.
The application can also be used to
manually set a static IP address.
Note that you must install the PTZ
network camera on the same network segment (physical subnet) as the computer
running AXIS IP Utility.
AXIS IP Utility is available on the CD supplied with this product, or it can be
downloaded from www.axis.com
Automatic discovery
1. Check that the PTZ network camera is connected to the network and that power
has been applied.
2. Start AXIS IP Utility. When the PTZ network camera appears in the window,
double-click it to open the camera's home page.
3. See page 8 for instructions on how to set the password.
Set the IP address manually
1. Acquire an unused IP address on the same network segment your computer is
connected to. Locate the serial number (S/N) on the camera's underside label.
2. Click the button
number and IP address for the PTZ network camera.
3. Click the Set IP button and then restart the PTZ network camera (within 2
minutes).
4. Click View Home Page to access the PTZ network camera's web pages.
5. See page 8 for instructions on how to set the password.
Note:
AXIS IP Utility can be used to change a dynamically set IP address to a static one.
(Set IP address using serial number) and enter the serial
AXIS 213 - Installation Guide
5