Configuring The Wireless Device - Nowsonic STAGE ROUTER PRO Bedienungsanleitung

Stage Router Pro
EN
User manual

Configuring the wireless device

With the Stage Router Pro, you can control digital audio devices such as Ethernet-capable digital mixers via specific apps installed on Wi-Fi en-
abled devices.
NOTE: Please find out in advance whether there is a specific app available for your audio device and whether this can be run on mobile Wi-Fi
devices. The Stage Router Pro only provides Wi-Fi functionality, but does not affect the interaction between the audio device and the app.
However, to allow control, you must first set up your Wi-Fi device as an access point on the Stage Router Pro's wireless network. This is configured
in the network settings of your mobile device. To do this, proceed as follows:
Open the Settings menu on your mobile device. Open the wireless settings.
■
Apple: Settings > Wi-Fi > Choose a Network
•
Android: Settings > Wireless & Networks > Wi-Fi
•
Tap on the Stage Router Pro's network: This can be found under the SSID name that you set in the 2.4/5G Wireless Setting fields in the Easy
■
Setup screen (see SSID).
Next, enter the password for the Stage Router Pro: Here, enter the access code that you entered in the Encryption option in the 2.4/5G Wire-
■
less Setting fields in the Easy Setup screen.
The access point settings for the Stage Router Pro will then be displayed.
■
Choose Static as the method of connection.
■
Enter the IP address: The first three numbers (default: 192.160.1.) must match the IP address of the Stage Router Pro (see below), and the last
■
numbers must differ.
In the Subnet Mask field, enter "255.255.255.0".
■
In the Router field, enter the IP address of the Stage Router Pro. If you haven't altered this setting when configuring the Stage Router Pro, the
■
address is: 192.168.1.1 (as printed on the rear of the device).
Enter the same IP address (see above) in the DNS field.
■
Close the settings menu and return to the Home screen of your mobile device.
If you have properly configured the Stage Router Pro as well as the audio device and your mobile device, you can now launch the app on your
mobile device and should be able to control your audio device. For further information, read the instructions for the app.
12
www.nowsonic.com