Configuring The Stage Router Pro - Nowsonic STAGE ROUTER PRO Bedienungsanleitung

Stage Router Pro
EN
User manual
MacOS X 10.8 and higher:
Click on System Preferences > Network.
■
Click on Ethernet in the Services list on the left.
■
Click the Advanced button in the corresponding dialog box.
■
Click on the TCP/IP tab and choose the Using DHCP option from the Configure IPv4 pop-up.
■
Click on the Renew DHCP Lease button.
■
Once the IPv4 Address and the Router have been updated automatically, click OK and close the settings dialog box.
■

Configuring the Stage Router Pro

The Stage Router Pro is configured via an HTML Administrator Tool to work as a Wi-Fi access point. The tool can be opened via the browser on
your host computer. Proceed as follows to configure the Stage Router Pro:
Open a web browser on your computer and type 192.168.1.1 in the address field: This is the preset IP address which is printed on the rear
■
panel of the Stage Router Pro. Press Enter.
A log-in screen will then be displayed: For both the user name and password, enter admin (default) and then click LOGIN.
■
The Easy Setup screen will then open. If you want to connect to the Internet via the Stage Router Pro, choose your desired protocol in the
■
Internet Setup list. You can choose from:
Static IP
•
DHCP Client
•
PPPoE (recommended)
•
PPTP
•
10
www.nowsonic.com