Technical Parameters
EN
Height of objects to be labelled
Working position in 3D space
Number of text lines per run
Maximum number of characters
Number of texts and accompa-
nying print-parameter
the printer's memory at the same
Printing of graphics (logo, spe-
cial graphics characters )
28
EN
Para me t er
Number of nozzles
Nozzle diameter
Print height
Line printing
per text
(stored in
time)
Special characters
EBS Ink-Jet Systems
Desc ri pti on
16
150µm as standard
optionally: 60µm, 80µm, 100µm, 120µm,
170µm, 200µm.
27 mm
from 70 mm
(contact with both rolls),
from 35 mm
(contact with the lower roll
to print with for example 7 nozzles only -
I
see figure
).
A guide and rolls can be used optionally
to support rectilinear printing; they are
most useful for line printing, for labelling
pipes, barrels and other cylindrical ob-
jects.
any
1
Supports printing of up to 10 texts in
successive lines.
1500 (including control characters for
the printer's built-in fonts).
from 1 to 10. Texts are loaded to the
printer via a PC.
Optionally.
Editing and printing of graphical texts and
symbols with the use of Windows
Type) fonts as standard.
National (diacritical) characters, graphic
characters
for
information,
transport and other purposes (a charac-
ter set defined by the manufacturer), etc.
®
(True
warning,
20050316#1.0