DJI OSMO+ Kurzanleitung Seite 8

6. Controls
Position the camera
●
directly by hand.
Trigger
●
Hold down the trigger and
push the joystick up and
down to zoom.
Hold down to enable Lock Mode.
Tap twice to center the camera.
Tap three times to enter Selfie
Mode.
SmoothTrack Mode is enabled automatically to smooth
out jerky movements.
The Osmo+ will beep slowly if the gimbal is locked after it
is turned on. This means the camera is working normally
but the gimbal is shut off.
If you need to unlock the gimbal after it is turned on, you
must rotate the pan motor after unlocking the tilt motor
and pan motor to reactivate the gimbal.
Use the joystick to pan or tilt
●
the camera.
Record Button
●
Press once to start recording,
and again to stop recording.
Shutter Button
●
Press once to take a photo.
Press and hold for burst capture.
7