Maintenance; Optional Accessories - Panasonic EY7881 Bedienungsanleitung

1. To attach the Chisel attachment
Remove the Support handle from
the Rotary hammer. Mount the
Chisel attachment on the tool.
Make sure to eliminate a play
between the attachment and tool.
Fix the attachment firmly on the
tool using the butterfly screw.
2. Attach the Support handle on the
Chisel attachment.
3. Insert/detach the Chisel bit
Read instruction manual of the
Rotary hammer.
4. To adjust the blade angle of the
Chisel bit
Rotate the Chisel attachment to
adjust the blade angle of Chisel bit
for better setting.
Dust Collection Cup (EY9X004E)
(Available as an optional
accessory)
• Drill bits of which diameter is 20 mm
above cannot be inserted through dust
collection cup.
• Do not use the tool for cutting other
than concrete, mortar and other ceram-
ic materials. If used for cutting metal
materials, the dust collection cup may
be damaged by the metal chip heat.
1. Install a drill bit.
2. Pass the drill bit through A and fix
the cup at B by matching with the
shape of the support handle.
[Fig.11]
Operation [Fig.12]
Keep the dust collection cup in close
contact with the wall surface during
operation.
Removal [Fig.13]
Hold the base of the dust collection cup
for removal.
Please remove after thoroughly getting
rid of the dust in the dust collection cup.
Storage [Fig.14]
Do not store the dust collection cup in a
compressed position. If kept in a
compressed position, it may be impos-
sible to return to the original shape.
V. MAINTENANCE
• Use only a dry, soft cloth for wiping the
unit.
Do not use a damp cloth, thinner,
benzine, or other volatile solvents for
cleaning.
• In the event that the inside of the tool or
battery pack is exposed to water, drain
and allow to dry as soon as possible.
Carefully remove any dust or iron filings
that collect inside the tool. If you experi-
ence any problems operating the tool,
consult with a repair shop.
VI. OPTIONAL
ACCESSORIES
CAUTION:
To prevent the risk of injury, only use
accessory or attachment for its stated
purpose.
NOTE:
If you need any assistance for more
details regarding these accessories,
ask your local service center.
Chisel Attachment
• EY9HX402E
Dust Collection Cup
• EY9X004E
Dust Collection System
• EY9X400E
See the operating instruction "EY9X400".
- 19 -
EN