Technical Specifications - Lindemann LIMETREE Headphone Bedienungsanleitung

16 EN

TECHNICAL SPECIFICATIONS

Measurement conditions: 22 °C, 230 V mains voltage,
Audio Precision AP2722
Power consumption: 0.15 W standby, 2.6 W operation
Dimensions (W x H x D): 107 x 40 x 130 mm (4.2 x 1.6 x 5.1 in)
Weight: 295 g (10.4 oz)
Gain: 12 dB (10 kOhms load)
Frequency response: 1 Hz – 300 kHz (-3 dB)
Distortions: < 0.001 % (at 0.5 V output and 10 kOhms load)
S/N ratio: > 98 dBV (A-weighted)
Lindemann audiotechnik GmbH | Am Anger 4 | D-82237 Wörthsee | www.lindemann-audio.com
info@lindemann-audio.de | Tel.: +49 (0)8153 95 333 90 | Fax: +49 (0)8153 95 333 99
GUARANTEE
Our products are manufactured exclusively in Europe by ISO-certified
plants. Each single device is then put to a full, also metrological func-
tional check at our premises. Therefore with a clear conscience we
grant an extended 3-year warranty period. An important prerequisite
for making claims under this extended guarantee is the online reg-
istration on our website. We suggest you do the registration right
after purchasing the device.
Please note: the guarantee does not cover damages arising from
improper use of the device. Also excluded from warranty coverage
are such devices which were opened or on which repair attempts
or modifications were performed by third parties. Liability for con-
sequential damages arising thereof is excluded. Moreover, any lia-
bility beyond the product value is excluded. Any deviating guarantee
commitments by dealers shall not be binding for us.