Zanussi ZTAB 250 Benutzerinformation Seite 7

Door opening and
laundry loading
1. Open the door.
2. Load your laundry
(do not force it in).
Caution! Do not
jam laundry in be-
tween the loading
door and rubber seal.
3. Close loading
door securely.
Lock must audibly
lock.
DELICATE
Pressing this button allows drying to be per-
formed at a lower temperature, for delicate
items. The corresponding pilot light comes on.
This option can be used for time controlled dry-
ing.
TEXTILE
Press the Textile button repeatedly, to select the
desired option. The relevant light will light up.
You can select 2 different options:
TON cycle: to be used for cotton, and
THETICS : to be used for synthetic or delicate
items.
Starting the programme
Press the START PAUSE button. The pro-
gramme is started.
The programme phase is shown by appropriate
lights; light 6- DRYING , light 5-
CREASE-END .
2) Only dryers with buzzer button
www.zanussi.com
Selecting the pro-
gramme
Turn the programme
selector dial to the re-
quired programme.
The light START
PAUSE starts to flash.
COT-
SYN-
ANTI-
1 2
Selecting additional functions
You can choose from the additional functions:
button 1 - DELICATE
button 2 - TEXTILE
Changing programme
To change a programme which has been selec-
ted by mistake once the programme has started,
first turn the programme selector to "O" - (OFF)
position. The programme is cancelled.
The programme can no longer be changed
directly once the programme has started. If
nevertheless there is an attempt to change the
programme on the programme knob or if an
function button (excluding the BUZZER but-
2)
ton ) is pressed, led on the
button starts flashing temporarily in red. The
drying programme is not however affected by
this (laundry protection).
Drying cycle complete / removing laundry
Once the drying cycle is complete, the lights
END and light 4-
zer is active, an acoustic signal sounds intermit-
tently for about one minute.
6 4
5
3
START PAUSE
FILTER are on. If the buz-
7