Pitch Adjustment - Omnitronic DMP-103 Bedienungsanleitung

Pitch adjustment

1
With the buttons PITCH [+] and [-], the playback speed can be adjusted in 1% steps up to ±24 %. Press
the button [-] to decrease the pitch step by step and the button [+] to increase the it. The pitch
percentage is indicated in the display.
2
To return to standard speed (0 %), press the button PITCH on the remote control.
Playing a continuous loop
A section within a title can be repeated as a seamless continuous loop as many times as desired. This loop
can be overwritten at any time and is deleted when selecting another title, changing the data carrier, or
switching the unit off and on again.
1
During playback shortly actuate the button IN when the desired starting point of the loop is reached.
2
Shortly actuate the button OUT when the desired end point of the loop is reached. The section between
the starting point and the end point of the loop is continuously repeated.
3
To set the starting and end point precisely to 1 frame (1/75 second) set the unit to pause and use the
buttons and
/
the button IN or OUT.
4
To exit the loop and to continue the title, press the button OUT.
5
To restart the loop, press the button RELOOP.
6
To program another loop, redefine the starting and the end point with the buttons IN and OUT.
Selecting repeat functions
With the button REPEAT three repeat functions can be selected:
• first actuation of the button: continuous repeat of the selected title (indication 1)
• second actuation of the button: continuous repeat of all titles in the selected folder with MP3 files (indication F)
• third actuation of the button: continuous repeat of all titles of the CD (indication A)
• fourth actuation of the button: return to normal play
Selecting random play
To activate random play, press the button
normal play, press the button once again.
Programming an individual title sequence
For playing selected titles in a certain order, an individual title sequence with up to 20 titles can be
programmed for audio CDs. This sequence will be deleted by ejecting the CD or switching the unit off and on
again. For MP3 CDs this function is not available.
1
In pause mode, press the button PROG/FLD on the player or PROGRAM on the remote control to
activate the programming mode. The display indicates the first memory location number P01.
2
Use the buttons
3
After the title selection, press the button PROG/FLD or PROGRAM to confirm the selection. The display
will show the second memory location number P02.
4
Proceed in the same way for all further titles until the title sequence has been programmed.
5
To start the playback of the title sequence, press the button
6
To add further titles to the title sequence, follow steps 1 to 5.
7
To delete the title sequence and to continue normal play, keep the button PROG/FLD or PROGRAM
pressed until the insertion P will be extinguished.
to go to the exact spot. The current spot is constantly repeated until you press
/
and to select the first title for the title sequence.
. The titles are now played in random order. To return to
. The display will show P.
28/30 00071453.DOC, Version 1.0