Aspire Dynamo Mod Bedienungsanleitung Seite 50

Using the Device
• Under CPS (customizable preheat settings), you can finely adjust the power curve by simulta-
neously pressing the „+" and „-" buttons. By pressing the „+" or „-" button you change the wattage,
with the fire button you select the preheat time between 1.0 and 9.5 seconds. By keeping the fire
button pressed, you save your settings and exit the menu item.
3. The menu item DATA is a shortcut to adjust the settings Preheat, TCR and CPS and to
lock the resistance.
• If the device is in TC or TCR mode and the atomizer head resistance is unlocked, the display
will show „New Atomizer?" And then „YES / NO" as soon as it detects a new atomizer head.
Use the „+" or „-" button to navigate to the desired setting and press the fire button to confirm
your selection and exit the menu item. If the resistance is locked and you are using a new
atomizer head, the message will not be displayed. The device will work according to your
previous settings.
Please note the following:
1. You can lock the resistance only in TC and TCR mode.
2. To ensure the working accuracy of the device, please unlock the resistance before installing a new atomizer head.
48