Explanation Of The Read-Only Function - Hama 00053186 Bedienungsanleitung

5.2.5 Explanation of the read-only function

You can access this function by choosing System -> Setup from the main menu.
You can use this function to read-only the host at which you are currently sitting to prevent files
from being accidentally deleted.
Note – read-only
► Please note, that the function read-only is active until you deacitvate it or close the
program.
For example, if you want to read-only the local host, proceed as follows:
• Select System from the main menu, and then choose the menu item Setup.
• This item is somewhat misleadingly labelled, but it only means that the computer at which you are
currently sitting will be write-protected as soon as you set the checkmark.
• If you want to deactivate write protection, remove the checkmark and click OK.
23