Battery Recharge; Battery Level - COGES BTDataKey Gebrauchsanweisungen

Dimensions (LxWxH)
Weight
Operating temperature
Data recording
LED signals
Reference directives
Communication with
smartphone/palmtop terminal

Battery Recharge

The cable for battery recharge, supplied with the
BTDataKey, shall be connected to the microUSB port
and a USB standard power supply.
The battery status is displayed each time that the BTDataKey is used for record-
ing (after the key insertion or after pressing the start button) or during the
recharge.
On the table below is indicated the battery level signalled by the DL2 LED.
Condition
Recharging
Recording
Attention: when the battery is under the minimum charge level it is not
possible to use it; both the LEDs DL1 and DL2 of the BTDataKey are fixed
red.
12 GB BTDataKey

Battery level

Red flashing (<20%)
Yellow flashing (from 21% up to 60%)
Green flashing (from 61% up to 99%)
Green fixed (100%)
Red fixed (<20%)
Yellow fixed (from 21% up to 60%)
Green fixed (from 61% up to 99%)
100 x 41 x 18 mm
36 g
0-35°C for the recharge phase
0-45°C for the normal use
Contactless and IR
Blue = active Bluetooth connection
Red = error and disconnection
Green = CL mode recording
Yellow = IR mode recording
EMCD 2014/30/UE
RED 2014/53/UE
BLE (Bluetooth Low Energy)
DL2