Technical Data - Opus MB 300 Bedienungshandbuch

BINDING & DE-BINDING (C-BIND)
8
Accessories enabling binding and de-binding of covers of the C-BIND system.
• Channel size selector tool (7)
• O•CB Inserts for Atlas 300 / MB 300, two part kit for all covers (dig. 1)
• O•CB Debinding Tool for Atlas 300 / MB 300 / MBE 300 - de-binding wedge (dig. 2) and AA
cover de-binding jig tool (dig. 3)
A1
Dig 1.
B1
channel number of
dimension bound sheets
soft cover 15-40
AA
hard cover 20-40
A
B
C 126-150
D 151-190
E 191-230
F 231-265
G 266-300
The bound documentation must have thickness of at least 1,8 mm (without cover). If the
documentation is thinner, it is obligatory to use filling strips (e.g. O•Filling Sticky available
at OPUS), to increase the thickness of bound documents. When using covers up to 16 mm size
(C), put before binding both binding inserts A1 and B1 to the binding slot and when using
covers with size over 16 mm, put only one B1 insert into the binding slot.
Depending on amount of inserts used during binding, position of the bow can be appro-
priately adjusted. If in the binding slot there is only one B1 insert, the bow should be moved
to the front end position, in case of binding by means of two inserts A1 and B1 the extended
back support (5) should be moved to the back end position.

TECHNICAL DATA

9
• Binding capacity
............................................................................................
• Net weight
..............................................................................................................
• Gross weight
..........................................................................................................
• Dimension (H x W x D)
* the tests were made on 80 g/m
Dig 2.
Binding and de-binding of covers of the C-BIND system
is performed analogous to binding with METALBIND system,
but: Measure the thickness of sheet pile to be bound
means of the cover selection tool or the chart and
41-95
select appropriate cover.
96-125
Important! The AA cover de-binding jig tool included
in the (O.CB Debinding Tool for Atlas 300 / MB 300 / MBE
300) should be fitted on the spine edge of AA cover be-
fore debinding.
....................................
substance paper
2
MB 300 • User's guide
Dig 3.
270 x 530 x 320 mm / 10.6 x 20.8 x 12.6 in
up to 300 sheets*
19 kg / 41.9 lbs
19.5 kg / 43 lbs
18.03.2015
GB