Technical Data - Opus Atlas 150 Bedienungshandbuch

Note! Make sure the back cover is facing you (C)
BINDING
Important!
The thickness of the documents
to be bound must be at least
1,8 mm (plus the cover).
If documents are thinner,
it is necessary to use the filling
strips from OPUS (O.Filling sticky)
to make it thicker.
Important!
Sometimes if you use too bigger
channel compared to the number
of pages it could happen that the
documents are not bound tight
enough, in this case repeat the
process once more, ensuring the
clamp lever is tight against the
channel.
6
DE-BINDING
Note! Make sure, the back cover faces up so you may see it.
DE-BINDING

TECHNICAL DATA

Atlas 150 • User's guide
GB