US Blaster USB 7392 Benutzerhandbuch Seite 4

USB 7392 - 7393
Microphone systems
4. Frequency Selection Button (Down)
This button (Down) allows you to select a working frequency of the receiver.
It also allows you to change receiver settings.
Note: To ensure a proper function of the HF system, the transmitter (handheld microphone or belt
case) and the receiver must be set to the same working frequency.
5. Frequency Selection Button (Up)
This button (Down) allows you to select a working frequency of the receiver.
It also allows you to change receiver settings.
Note: To ensure a proper function of the HF system, the transmitter (handheld microphone or belt
case) and the receiver must be set to the same working frequency.
6. On/Off Button
This button allows you to turn the receiver on or off.
1. A-Aerial Connector
Connect the aerial (supplied with the microphone set) to this socket.
2. Power Supply Connector
Connect the DC 12V power supply (supplied with the microphone set) to this socket. Note: Do not
connect other types of power supply (an AC one or a DC one supplying more than 12V). Otherwise,
it may result in damage to the receiver.
3. B-Channel Symmetrical Output
This socket is an audio output for the B-channel of the receiver. Connect this output to the micropho-
ne input of your audio mixer or directly to an input of your amplifier.
Note: It is a symmetrical output. Therefore, use a symmetrical cable and XLR connector.
4. Mix Asymmetrical Output
This socket is an audio output mixing both channels. Connect this output to the microphone input of
your audio mixer or directly to an input of your amplifier.
Note: It is an asymmetrical output. Therefore, use an asymmetrical cable and 6.35mm jack.
© US Blaster Europe BV