Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USB 7392 - 7393
Microphone systems
WIRELESS MICROPHONE
Then, pull open handle to reveal the transmitter's lcd monitor.
NOTE: When pulling out handle, make sure that you pull it straight out.
Then, to change the settings, press "SET" to switch to the mode you want to adjust on the transmitter, and
up and down to select. Press "SET" again to confirm. when the battery is low, the light above the lcd screen
will be flashing.
To modify the other modes, press "SET" to that mode and the up or down button to select the adjustments.
Press "SET" again to confirm.
NOTE: Match your frequency on the transmitter to those on the receiver(s) for a better signal.
NOTE: If you do not press "SET" to confirm no adjustments will be made.
NOTE: Damage due to improper usage will void your warranty.
© US Blaster Europe BV
Werbung
Inhaltsverzeichnis
