Kensington SlimBlade Bedienungsanleitung Seite 6

4. Click Continue.
Select Mouse from the device list, and click Continue.
5.
6. On your mouse, press the Discover button.
7. The indicator light on the mouse blinks green. Kensington
SlimBlade Presenter Mouse appears on your computer
screen. Click Continue.
8. On the Conclusion screen, click Quit.
Registering Your Kensington Product
Register your Kensington product online at
www.kensington.com.
Compatibility
• Windows® XP SP2 and Windows Vista® operating systems
• Mac OS X versions 10.4 or later
NOTE: The tilt scrolling works only in Microsoft Office (Basic)
2003/2007, Internet Explorer, ® and PowerPoint® on Windows
XP and Windows Vista OS.
Common Troubleshooting Steps
1. Install fresh batteries in the mouse.
2. Test the mouse on another computer.
3. Some surfaces may "trick" the sensor, such as reflective
surfaces like glass or mirrors. As a result this product will
not work well on glass or mirror surfaces. The sensor
should perform well on all other surfaces.
Health Warning
Use of a keyboard or mouse may be linked to serious injuries
or disorders. Recent medical research of occupational Injuries
has linked normal, seemingly harmless activities as a potential
cause of Repetitive Stress Injuries ("RSI"). Many factors may
be linked to the occurrence of RSl, including a person's own
medical and physical condition, overall health, and how a
person positions and uses his or her body during work and
other activities (including use of a keyboard or mouse). Some
studies suggest that the amount of time a person uses a
keyboard or mouse may also be a factor. Consult a qualified
health professional for any questions or concerns you may
have about these risk factors.
When using a keyboard or mouse, you may experience
occasional discomfort in your hands, arms, shoulders, neck, or
other parts of your body. However, if you experience symptoms
such as persistent or recurring discomfort, pain, throbbing,
aching, tingling, numbness, burning sensation, or stiffness,
even if such symptoms occur while you are not working at your
computer. DO NOT IGNORE THESE WARNING SIGNS. PROMPTLY
SEE A QUALIFIED HEALTH PROFESSIONAL. These symptoms
can be signs of sometimes permanently disabling RSI disorders
of the nerves, muscles, tendons, or other parts of the body,
such as carpal tunnel syndrome, tendonitis, tenosynovitis,
and other conditions.
Technical Support
Technical support is available to all registered users of
Kensington products. Support contact information can be
found on the back page of this manual.
Web Support
You may find the answer to your problem in the Frequently
Asked Questions (FAQ) section of the Support area on the
Kensington Website: www.support.kensington.com.
Telephone Support
There is no charge for technical support except long-distance
charges where applicable. Please visit www.kensington.com
for telephone support hours. In Europe, technical support is
available by telephone Monday to Friday 0900 to 2 100.
Please note the following when calling support:
• Call from a phone where you have access to your
computer
• Be prepared to provide the following information:
- Name, address, and telephone number
- The name of the Kensington product
- Make and model of your computer
- Your system software and version
- Symptoms of the problem and what led to them
10
RF TECHNICAL SPECIFICATIONS
RF Frequency 2.4– 2.4835 GHz
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
Note: This device has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment causes harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
MODIFICATIONS: Modifications not expressly approved by
Kensington may void the user's authority to operate the device
under FCC regulations and must not be made.
SHIELDED CABLES: In order to meet FCC requirements, all
connections to equipment using a Kensington input device
should be made using only the shielded cables.
FCC DECLARATION OF CONFORMITY
COMPLIANCE STATEMENT
This product complies with Part 15 of the FCC Rules. Operation
is subject to two conditions: (1) This device may not cause
harmful interference, and, (2) This device must accept any
interference received, including interference that may cause
undesired operation. As defined in Section 2.909 of the FCC
Rules, the responsible party for this device is Kensington
Computer Products Group, 333 Twin Dolphin Drive, Sixth Floor,
Redwood Shores, CA 94065, USA.
INDUSTRY CANADA CONFORMITY
This device has been tested and found to comply with the
limits specified in RSS-210. Operation is subject to the
following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of
the device.
This Class [B] digital apparatus complies with
Canadian ICES-003.
CE DECLARATION OF CONFORMITY
Kensington declares that this product is in compliance with the
essential requirements and other relevant provisions of
applicable EC directives.
For Europe, a copy of the Declaration of Conformity for this
product may be obtained by clicking on the Compliance
Documentation link at www.support.kensington.com.
CLASS 1 LASER SAFETY STATEMENT
This laser device complies with international
standard IEC 60825-1: 2001-08, class 1 laser
product and also complies with 21 CFR
1040.10 and 1040.11 except for deviation pursuant to Laser
Notice No. 50 dated Jun 24, 2007:
1. Emission of a parallel beam of infrared user-invisible light.
2. Maximum power of 716 microwatts CW, wavelength
range 832-865 nanometers.
3. Operating temperature between 0 ° C (32° F)
to 40° C (104° F).
While the Class 1 laser in this product is safe under normal use,
the laser beam (which is invisible to the human eye, but
emitted from the bottom of the mouse) should not be pointed
at anyone's eyes.
CAUTION: This device has no serviceable parts. Use of controls
or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
SAFETY AND USAGE GUIDELINES
1. In the absence of proper operation and if customer-
initiated troubleshooting is unsuccessful, switch off
device and contact Kensington technical support:
www.kensington.com.
2. Do not disassemble product or expose it to liquid,
humidity, moisture, or temperatures outside the specified
operating ranges of 0° C (32° F) to 40° C (104° F).
3. If your product is exposed to out-of-range temperatures,
switch it off and allow temperature to return to the
normal operating range.
INFORMATION FOR EU MEMBER-STATES ONLY
The use of the symbol indicates that this product
may not be treated as household waste. By ensuring
this product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service, or the shop where you purchased the product.
Kensington and ACCO are registered trademarks of ACCO Brands.
SlimBlade is a trademark of ACCO Brands. The Kensington Promise
is a service mark of ACCO Brands. Bluetooth is a trademark of
Bluetooth SIG, Inc. Windows Vista and Windows are either
registered trademarks or trademarks of Microsoft Corporation in
the U.S. and/or other countries. Mac and Mac OS are trademarks
of Apple Computer, Inc. registered in the U.S. and other countries.
All other registered and unregistered trademarks are the property
of their respective owners. Patents Pending.
© 2008 Kensington Computer Products Group, a division of ACCO
Brands. Any unauthorized copying, duplicating, or other
reproduction of the contents hereof is prohibited without written
consent from Kensington Computer Products Group. All rights
reserved. 1/08
11