Cleaning The Condenser; Emptying The Water Container - AEG LAVATHERM 6DBG72P Benutzerinformation

16 www.aeg.com
3. Use a moist hand to clean the filter.
4. If necessary clean the filter with a
vacuum cleaner. Close the filter.
5. If necessary remove fluff from the
filter socket and gasket. You can use
a vacuum cleaner. Place the filter
back inside the filter socket.
10.2 Emptying the water
container
Empty the condensed water container
after each drying cycle.
If the condensed water container is full,
the programme stops automatically. The
tank (reservoir) symbol comes on the
display and you must empty the water
container.
To empty the water container:
1. Pull the water container out keeping
it in a horizontal position.
2. Pull the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3. Push the plastic connection back in
and place the water container back
into position.
4. To continue the programme press
the Start/Pause (/Pauze) button.

10.3 Cleaning the condenser

condenser (condensor)
If the symbol
flashes on the display, inspect the
condenser and its compartment. If it is
dirty, clean it.
To inspect:
1. Open the door.
2. Open the condenser cover.
3. Turn 2 blockages to unlock the
condenser lid.