Owner's instruction
Dehumidification Mode
Auto Changeover Mode
26 Wide Wired Remote Controller
1
Press
button to turn on the
indoor.
2
Press
button to select
Heating mode.
The temperature setting can not
be adjusted during operation
this mode.
3
Press the
airflow rate SLO
HI
(NONE)
(The lists depends on products function)
NONE : Power level of Fan Speed
In rainy season or high humidity climate, it is possible
to operate simultaneously dehumidifier and cooling
mode to remove humidity effectively.
1
Press
button to turn on the
indoor.
2
Press
button to select Auto
Changeover Mode.
3
The setting temperature as
the right side picture can be
set in both cooling/ heating
model.
Setting Temp Range : 18˚C~30˚C (64˚F~86˚F)
button to select
LO ' MED