Getting Started; Hardware Overview - Yealink CP930W-Base Schnellstartanleitung

E
N
G

Getting Started

L
I
S

Hardware Overview

H
Off-hook Key
Bluetooth Key
OK Key
Registration
You can register up to 8 CP930W to one W60B base station. Each CP930W can only be regis-
tered up to one base station.
When the CP930W LCD screen prompts "Unregistered!", long press
the registration LED indicator flashes.
There are two methods to register a new CP930W:
Easy Registration:
1. Tap the Reg soft key on the CP930W to register quickly.
Normal Registration:
1. Tap the OK soft key on the CP930W, and then select Register Handset.
2. Tap the OK soft key after searching a base station successfully.
3. Enter the base station PIN (default: 0000), and then tap the Done soft key to complete the
registration.
To register to multiple base stations, tap the Menu->Settings->Registration->Register Hand-
set, then repeat steps 2-4.
Note:
• If the CP930W is registered to the base station successfully, the LCD screen prompts
"Handset Subscribed" and "Base NO."( the "NO." indicates the last 4 characters of the base
station's MAC address).
• If the CP930W LCD screen prompts "Searching for Base", check that your base station is
powered on.
4
1
2
Welcome
Initializing...Please wait
10
11
12
1
1 Microphone Microphone
2
Mute Key
3
Speaker
4
LCD Screen
5
Soft Keys
On-hook/Power Key
6
13 Up Navigation Key
7
Keypad
14 Down Navigation Key
8
Volume(+) Key
2
9 Volume(—) Key
on the base station till