Ventilation Element; Installing The Leveling Legs; Installation Limitations; Installing The Water Tray - Rotel U903CH1 Gebrauchsanweisung

 VENTILATION ELEMENT
A. Slot
10. Place the hook in the slot.
11. Turn the filter according in the direction of the arrow until the hook enters the slot.
12. Please clean the filter regularly.
Photo shown may vary from product
 INSTALLING THE LEVELING LEGS
o
Install the legs by screwing them into the holes on the unit. Please note that the leg
that is positioned on the hinge is shorter than the others.
 INSTALLATION LIMITATIONS
o
Do not install your wine cooler in an insulated or heated location e.g. garage etc.
o
Avoid placing the unit where there may be electrical interference.
o
Your wine cooler is designed to be free-standing only. It is not designed to be built-
in.
 INSTALLING THE WATER TRAY
o
The purpose of the water tray is to catch any condensed water that drains from the
cavity. The collected water will evaporate so there is no need to remove the water
manually.
o To insert the water tray, simply slide in the water tray along the track which is located
beneath the cabinet body. The tray should be inserted from the back of the cabinet.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
B. Hook
41
C. Arrow