Temperature Adjustments - Rotel U903CH1 Gebrauchsanweisung

 TEMPERATURE ADJUSTMENTS
o
Your wine cooler has a touch screen control on the front of the unit. You can set the
temperature of your wine cooler to any setting you desire. The temperature ranges
from 4℃ to 22℃. When initially turned on, the LED will show the ambient
temperature and the default setting will be 10℃. The LED will then display the
internal temperature.
o
NOTE: the white wine temperature is cooler than for red wine.
o
By touching the (+) temperature button on the display, you can increase the
temperature and touching the (-) temperature button will lower the temperature.
Your wine cooler also has a light for your viewing pleasure. A light switch on the
control panel will activate the light manually. Under normal operation, it is best for
the light to remain off.
o
Please note that the actual cabinet temperature in a thermal electric unit is
dependent on the ambient temperature.
o
Should the temperature difference between the pre-set temperature and the
ambient temperature be greater than 15℃, the cabinet may not achieve the pre-set
temperature.
o
For this model when the ambient temperature is 25℃, the lowest temperature that
can be reached is 10℃. When ambient temperature is 21℃, the cabinet temperature
can reach approximately 6℃.
o
Note: The display temperature is from 0℃ to 70℃. So, when the wine cooler is in an
ambient temperature of higher than 70℃ or lower than 0℃, the display will show "-
-" until the cabinet has cooled down to 70℃ or warmed up to 0℃. When the wine
cooler is started, the temperature display will show the ambient temperature.
o
When the ambient temperature is below the pre-set temperature, the wine cooler
will not operate until the ambient temperature goes over the pre-set temperature.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
40