Remote Control Functions - ZENEC ZEM-W700DMM Bedienungsanleitung

REMOTE CONTROL FUNCTIONS

CONTROL FUNCTIONS
1. POWER
■ To turn ON or turn OFF the unit.
2. SETUP
■ DVD/CD changer mode DVD built-in
functions menu (refer to SANYO DVD/
CD changer specification) to operate
the menu of the source unit.
3. UP/DOWN
■ DVD changer mode
It is the up/down button under Setup/
Menu status.
■ Press and hold this button to choose
the Previous/Next disc.
■ TV mode
To choose the previous/next pre-set TV
station.
4. SEL (Selection)
■ Press this button, to select
a. Initial volume setup
b. TA volume setup
c. Bass adjustment (use Vol+/- to adjust)
d. Treble adjustment (use Vol+/- to adjust)
e. Balance adjustment (use Vol+/- to
adjust)
f. Fader adjustment (use Vol+/- to adjust)
■ Push and hold this button, to select
Loudness ON/OFF
5. ENTER
■ in DVD menu, to confirm your selected
item
■ TV mode, press this button to affirm
after input 0~9.
31