Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Follow the steps below for Event Playback
1. Tap
and then the
2. Select the time interval for the event list.
3. Tap to select the file for playback.
4. If you want to store the files in mobile device, tap the download-button (use Wi-Fi connection to save your data usage)
(1)
(1)-1
CAMERA INSTALLATION
A.
•
Place the mounting bracket on the mounting surface as a pattern to mark the holes.
•
Drill the mounting holes and use the wall plug screws to secure the bracket to the wall.
•
Fasten the camera to the bracket using the tapping screws.
•
Hang the camera and plate onto the hanger screws. Arrange cable properly so that it will not block pan/tile operation.
SAS-CLALMS10 Installation
•
Choose a suitable location. Install the detector at least 2 meters from the floor.
•
Install the detector to the wall in the upright position using double-sided adhesive tape or the wall mount bracket with screws.
•
If necessary, adjust the angle of the detector, but maintain the upright position. Direct the detector under a correct angle towards entrances, but avoid facing doors or
windows, heat sources or moving objects.
SAS-CLALDW10 Installation
•
Install the transmitter to the frame of the door or window using double-sided adhesive tape or screws.
•
Install the magnet to the door or window using double-sided adhesive tape or screws. Make sure that the magnet is aligned correctly to the transmitter (markings on the
magnet and the transmitter) within 1 cm from each other.
MOTION DETECTION / CAMERA SETTING TIPS
For optimum detection, we suggest the camera is to be mounted 7 to 8 feet (2.1m to 2.4m) from the floor, on a rigid vibration-free surface.
To avoid false alerts, please note PIR Motion Sensor operates by detecting temperature changes in the area in front of the device; Please avoid placing the device under the
following environments:
(1) Aiming the PIR at windows or glass doors.
(2) Where small animals may enter the detection area.
(3) Where a heat source (sunlight, incandescent light, car headlights, etc) may affect the motion sensor.
(4) Where sudden temperature changes inside or around the detection area caused by hot or cold wind (fans, air conditioners, etc.).
(2)
B.
7
(3)
Download
Download
Download
Download
Download
Download
Download
Download
Download
Download
Download
(4)
Werbung
Inhaltsverzeichnis
