Engine Identification; Electrical Equipment; Ruggerini Service - Ruggerini Rd211 Bedienung Und Wartung

ENGINE IDENTIFICATION

A
B
C
D
E

ELECTRICAL EQUIPMENT

RUGGERINI SERVICE

The engine identification plate is located on the air conveyor (figure 1, 22).
A= (Type) engine type
F
B= (No.) engine serial number
G
C= (Omol.) type approval code
D= (cc) displacement in cm³
The wiring diagram can be found in figure 20 on page 83.
1. Ignition key (optional)
2. Voltage regulator
3. Engine starter
4. Battery (not included)
5. Alternator
6. Pressure switch
7. Battery recharge warning light (optional)
8. Oil pressure warning light (optional)
Correct and constant maintenance of the engine is an essential condition to ensure its
endurance, thus reducing operating costs.
To request servicing or spare parts, contact one of the authorised Service Centres listed
in the "WORLD SERVICE ORGANISATION" booklet you will find inside the bag
containing the accessories, specifying:
- all data found on the engine identification plate,
- kind of intervention.
For any further information, contact Ruggerini Service.
E= (rpm) standard RPM
F= (Version) version
G= (rpm setting) special RPM setting
English
25