Removal of the covers
Setting of the air fl ow holes and wall bracket installation
The holes for air fl ow must be made with dimensions as close as possible to the ones described on the picture.
The bracket position is essential for the correct positioning of the air outlet hole and the air inlet hole. Use the bracket as a
template for the holes, than use the supplied screws to secure it.
!
Make sure that the wall is capable of supporting the appliance in working condition.
• Make on the wall nr. 4 x Ø8 holes deep 45 mm;
• clean the inside of the holes;
• Insert the four screw plugs supplied keeping the fi ns on the vertical plain.
M1100-0_draft-0
ENGLISH
gb-37