Seite 1
Aufbauanleitung / assembly instructions mod. 4118 M10 x 16 M10 x 392 1. Montagematerial 2. Die Glasplatte auf gepolsterten 1. fitting material Montageböcken ablegen. 2. Lay the glass onto padded assembling trestles. M10 x 392 3. Die Gewindestange in das Klebeteil eindrehen.
Seite 2
8. Durch Peilen sicherstellen, dass die Glasplatte einem Inbusschlüssel fixieren. parallel zur Bodenplatte ist. 7. Turn a cap nut onto the threaded bolt by using 8. Check by watching, if the glass is parallel to a hex-wrench. the metal base-plate. 2 / 3 4118 Änderungsdatum: 29.02.16...
Seite 3
If the glas ist not horizontal, please adjust the black screws, which are located beneth the ground plate. Bitte beachten: Die Risse im Holzklotz sind gewollt und unvermeidlich. Please note: The shakes in the wood are as requested because the shakes underline the carakter of the oak wood called "Rissbeiche". 3 / 3 4118 Änderungsdatum: 29.02.16...