Climate Conditions Check And Operation - EOS WCI-01 Montage- Und Gebrauchsanweisung

App graphic user interface and the current climate conditions check
Thanks to the modern GUI you can quickly access all functions and make necessary settings, as
well as make a simple instant query for the current sauna climate condition.
The symbols on the start screen may be displayed in different colours, in order to indicate the
current operation status - e.g. red highlighted heater during active heating.
For every selected symbol the control panel will display the explanation at the top and will provide
additional text hints by various settings. The language selection shall be done in the control unit.
Target
60°C
40%
The „%" sign in the cloud means there is a humidity sensor. Otherwise a symbol
played. You can return to the main screen at any time by pressing "back" or Home buttons.
Notice: Please pay attention that the shown values for the current temperature (humidity) are
measured at the sensor location point. Because of the considerable differences in temperature in
different parts of a sauna these values may vary from the values shown by the instruments mount-
ed at the sauna wall. We recommend to choose the temperature which is most pleasant to you.
Info
Current
48°C
35%
01. Januar 2014
15:20:35
Start screen (stand by mode)
The images show the start screen by EmoTouch II+
(left) and Emotec D (right) control unit. By Emotec H
with the enabled vaporizer additionally a cloud sym-
bol will be shown.
Start screen (active heating mode)
The active heating will be shown similarly as on the
sauna control units - illuminated heater symbol by
EmoTouch II+, red pulsing thermometer by Emotec
(blue cloud by Emotec H in humid mode).
The remaining heating time will shown as usually in
the form of the countdown clock. You can stop the
sauna by pressing on the "On/Off" button.
By humid mode the sauna will then switch to the
"sauna dry" mode first. You can interrupt it by press-
ing the "On/Off" button again.
The interface will return back to the stand-by mode.
Climate conditions check
By EmoTouch II+ touch shortly the symbol of
thermometer/hygrometer
H the climate conditions will be displayed con-
tinuously, no need to press any button.
The current temperature is shown as measured
by the sensor (if a bench sensor is connected,
then as measured by the bench sensor)
If no humidity sensor is connected, then the
value of the proportional setting will be shown.
EN
. By Emotec D or
will be dis-
27