ASROCK 4Core1600Twins-P35 Schnellinstallationsanleitung Seite 29

1. In order to enable the eSATAII port of the I/O shield, you need to connect the
orange SATAII connector (SATAII_6 (Port5); see p.2 No.17) and the eSATAII
connector (eSATAII; see p.2 No.36) with a SATA data cable first.
Connect the SATA data
cable to the orange
SATAII connector
(SATAII_6 (Port5))
2. Use the eSATAII device cable to connect eSATAII device and the eSATAII port of
the I/O shield.
Connect one end of the eSATAII
device cable to eSATAII device
ASRock 4Core1600Twins-P35 Motherboard
Connect the SATA
data cable to the
eSATAII connector
(eSATAII)
Connect the other end of the eSATAII
device cable to eSATAII port of the I/O
shield
2 9 2 9 2 9
2 9 2 9