Technical Data - Tack life PES01A Bedienungsanleitung

●
Make sure the power switch is in the OFF position before plugging in the cord.
●
Always check that spanners etc. have been removed from the machine before switching it on.
●
Never start the tool when any rotating parts are in contact with the workpiece.
●
Hold the tool firmly with both hands.
●
Make sure the workpiece is free of nails and foreign objects.
Never try to slow the blade by pressing it against the workpiece.
●
Never block the blade guard.
●
Check that the blade is correctly installed and is rotating in the correct direction. The tool is
intended for sawing wood.
●
Do not attempt to saw or sand metal or stone.
●
Do not press too hard when sawing. This can result in personal injury and can overload the tool.
●
The cross section of the extension cord must be sufficient for the tool's power supply. Do not
●
use extension cords that are longer than necessary. If an extension cord is used, the entire
cord must be uncoiled.
●
Never allow the blade to reach maximum speed before applying it to the workpiece.
●
Only use sharp blades that are not cracked or deformed. If the blade is dull, the tool can be overloaded.
●
Inspect all screw connections and tighten before use.
●
Contact your dealer in the event of any problems.
●
Repairs must only be carried out by qualified personnel using identical spare parts.
Rated voltage
Output power
Max. speed
Blade
Saw depth
Weight
Sound power level, LwA
Sound pressure level, LpA
Max. vibration level
Always wear ear protection.
The declared vibration value, which has been measured by a standardised test method, can be used
to compare different tools with each other and for a preliminary assessment of exposure.
WARNING: The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of exposure in actual operating conditions
(taking into account all stages of the work cycle, e.g. the time when the tool is switched off and when
it is idling, in addition to the start-up time).

TECHNICAL DATA

120 V ~ 60 Hz (US) 230V ~ 50Hz (UK)
12.5A / 1500 W (MAX: 15A /1800W)
4700 rpm
185 x 20 mm
63 mm
4.3 kg
97 dB(A), K=3 dB
86 dB(A), K=3 dB
4.3 m/s2, K=1.5 m/s2
- 02 -