Operation; Maintenance; Optional Accessories - Makita 9741 Bedienungsanleitung

NOTE:
The output shaft has a left hand thread.
•
To install the wheel, follow the removal procedures in
reverse. When installing it, be sure to align the notches in
the wheel with the pins on the spindle.
Fig.4
Connecting to dust collector
Fig.5
The use of a dust collector makes sanding operations
clean and dust collection easy. To connect a dust
collector, open the dust port by sliding the cover plate up
and in a clockwise direction. Attach the joint onto the dust
port. Now a dust collector can be connected to this tool.
CAUTION:
When not using a dust collector, close the dust port
•
opening with the cover plate.

OPERATION

Fig.6
Hold the tool firmly with both hands on the handle and the
grip in front. Place the tool on the workpiece surface and
move the tool gently forward and backward while
applying slight downward pressure.
CAUTION:
The tool should not be in contact with the workpiece
•
surface when you turn the tool on or off. Damage to
the tool or the workpiece surface and injury to the
operator may result.
Apply slight downward pressure only. Excessive
•
pressure may decrease tool efficiency, shorten
wheel service life and possibly gouge the
workpiece surface.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
Replacing carbon brushes
Fig.7
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps. Take
out the worn carbon brushes, insert the new ones and
secure the brush holder caps.
Fig.8
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Nylon brush wheel
•
Slit paper wheel 120 - 40
•
Wire brush wheel 120
•
Cotton buff wheel 120
•
Joint
•
Hex wrench
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
5
or attachments
Only use accessory or
are