Dry Vacuum Cleaning - Philips HR6836/01 Gebrauchsanweisung

How to make your Triathlon ready
for use.
General
7
• Connecting the hose: Slightly turning,
insert the end of the hose into the hose
connector (fig. 7).
To disconnect: Slightly turning, pull the
end of the hose out of the connector (fig. 8).
• Connecting the tubes and nozzles:
Press the spring-
back knob and
insert the narrowed
section into the
wider section. The
spring-back knob fits
into the opening
(fig. 9).
To disconnect:
press the spring-
back knob and pull
the sections away from each other.
• Make the vacuum cleaner ready for either
dry vacuum cleaning, for vacuuming liquid
or for shampooing.
Before first use: open container and
remove dust bag holder.
(For dry use: fix and position dustbag.)
8
9
Dry vacuuming cleaning
Remove: float unit and diffusor.
Place: Micro Filter and paper dustbag.
10
- Remove the mains plug from the wall
socket.
- Undo the clamps (fig. 10).
- Using the handle, lift the motor unit from the
container (fig. 11).
12
- Remove the float unit (fig. 12).
- Remove the diffuser (fig. 13).
14
1
- Undo the shampoo tube: rotate clockwise
(1) and pull (2) (fig. 14).
- Remove the shampoo reservoir (fig. 15).
7
11
13
15
2