AKASO V50 Bedienungsanleitung Seite 4

Video Mode
Video Mode is the default mode after camera power on.
Make sure the Video icon shows on the screen before recording. If not, press the Power/Mode
Button repeatedly until it appears.
Press the Shutter/Select Button, the camera will start to record video. Meamwhile the status
light will flash and one beep will be emitted by the camera.
Press the Shutter/Select Button to end video recording.
Loop recording: In VideoSetting, turn on the loop recording. The return to Video Mode, press
OK Button to record, the video will automatically be saved as a file (depends on the chosen
video resolution, usually about 2/3/5 mins). The recording time on IPS screen starts at zero.
When the memory is full, the first video would be covered, and so on.
When recording starts, you can not switch modes. To switch mode, please stop recording first.
When the battery runs out, the camera will stop working. But the video will be saved
automatically.
Photo Mode
Press Power/Mode Button repeatedly to switch to Photo Mode.
Shooting photo: in Photo Mode, press Shutter/Select Button to shoot photos; The camera will
emit camera shutter sound if it has been turned on in Settings.
Burst Photo Mode
Press Power/Mode Button repeatedly to switch to PhotoSetting;
Press Shutter/Select Button and choose Burst Photo;
In Burst Photo Mode, it takes 1s to take 3 photos. The camera will emit camera shutter sound if
it has been turned on in CameraSetting.
Time Lapse Photo Mode
Press Power/Mode Button repeatedly to switch to PhotoSetting;
Press Shutter/Select Button and choose Time Lapse Photo;
In Time Lapse Photo Mode, your AKASO Action Camera captures a series of photos at 3s/5s/
10s/30s/1m intervals.
Time Lapse Video Mode
Press Power/Mode Button repeatedly to switch to VideoSetting;
Press Shutter/Select Button and choose Time Lapse Video;
In Time Lapse Video Mode, your AKASO Action Camera records video at 1s/3s/5s/10s/30s/1m
intervals.
3
VideoPlayback Mode
To review videos on the camera, press Power/Mode Button repeatedly to switch to
VideoPlayback Mode.
Press Up or Down Button to cycle through the overview of videos.
Press Shutter/Select Button to playback the desired one.
To delete videos, press the Shutter/Select Button for 5s. The menu for deleting will show up.
Then Press Shutter/Select Button to delete the videos you want.
PhotoPlayback Mode
To review photos on the camera, press Power/Mode Button repeatedly to switch to
PhotoPlayback Mode.
Press Up or Down Button to cycle through the overview of photos.
Press Shutter/Select Button to playback the desired one.
To delete photos, press the Shutter/Select Button for 5s. The menu for deleting will show up.
Then Press Shutter/Select Button to delete the photos you want.
Settings
1. Press Power/Mode Button repeatedly to switch to Settings.
2. Press Up or Down Button to cycle through the various options.
3. Press the Shutter/Select Button to select the desired option.
When finished with the specific setting, press the Power/Mode Button once, it will exit from the
current setting. Then press the Power/Mode Button again, it will switch to video mode.
CameraSetting
Power Frequency: 50HZ/60HZ
Sounds: Shutter on/off
Boot-up: on/off
Beep: on/off
Volume: 0/1/2/3
White Balance: Auto/Daylight/Shade/Tungsten Light/White Fluorescent/Underwater
Exposure: -2.0/-1.0/+0.0/+1.0/+2.0
Date Stamp: Off/Date/Date&Time
Date & Time: YY/MM/DD/HH/MM
Screen Saver: OFF/30s/1min/2min
Auto Power Off: OFF/1min/2min
Power-On Auto Record: ON/OFF
BT: ON/OFF(Please turn on it when you connect the remote to camera)
Reset WiFi Setting: Yes/No
Language: English/German/Italian/Spanish/French/Japanese/Chinese
Format Card: Yes/No
System: Default Setting: Yes/No
System Info: Ver
Card Info: Capacity/Free Space
4