Checking Digital Inputs/X-10 Commands - Honeywell HX 85 Montage Und Bedienung

Checking digital inputs/X-10 commands

Checking digital inputs/X-10 commands
The Expansion Module HX 85 enables an operational test to be
carried out after binding.
Switch to the "Display/Sensor Values" menu at the HCM 200D.
►
Press and hold the button on the HX 85 for at least 10 seconds.
►
The green LED integrated in the button exhibits the following
illumination behaviour.
The expansion module is in test mode after 10 seconds.
66