Operating Modes - Honeywell HX 85 Montage Und Bedienung

Operating modes

For the purposes of the HCM 200D, operating mode 1 functions in the
same manner for processing of five digital inputs as operating mode 2
does for the integration of the ADEMCO alarm system. Digital inputs
1–5 correspond to device addresses A1–A5 of the X-10 protocol, i.e.
the first sensor input corresponds to A1, the second to A2 etc.
Only one of the two operating modes B1 and B2 can be
selected. Operating mode B2 is only possible with HCM 200D.
Address assignment
OM 1 (DI)
1
2
3
4
5
OM 2 (Operating Mode 2) (X-10), only
possible in conjunction with HCM 200D
House code: A / key code:
House code: A / key code:
House code: A / key code:
House code: A / key code:
House code: A / key code:
Operating modes
1
2
3
4
5
39