Execute Binding At Expansion Module Hx 85 - Honeywell HX 85 Montage Und Bedienung

Binding
Press the Input button.
►
The cursor flashes to the right on the
selected line.

Execute binding at Expansion Module HX 85

Press the button on the expansion module for at least 5 seconds.
►
The green LED integrated in the button illuminates and goes out
briefly after 5 seconds.
An * and then the message DIGITAL
briefly appear for each sensor in the
HCM 200D display. Altogether,
5 sensors are installed.
If you have wired fewer than five sensors, we recommend de-
installing the redundant ones (see the De-installing sensors
section, Page 60)
58
SENSOR -1
C
SENSOR -2
SENSOR -3
SENSOR -4
SENSOR -1
SENSOR -2
SENSOR -3
SENSOR -4
DIGITAL
DIGITAL
DIGITAL
DIGITAL