Honeywell HX 85 Montage Und Bedienung Seite 42

Operating modes
When programming the alarm system, it must be ensured that
house code A is used to trigger the alarm for OM 2.
Assignment table between input voltage and operating mode
DI voltage
0 V
12 V AC/DC
Setting operating mode and priority*
The operating mode setting includes the specification of operating
mode 1 or 2 and the general setting of the priority for the digital input
DI1 or device address A1.
The priority can only be specified for DI1 or A1.
By issuing priority, alarms can be handled with preference both in OM
1 and OM 2.
If DI1 or device address A1 is set to priority, the status of the DI1 is
transferred cyclically (2 min ±30 s) until the cause of the alarm is
suppressed. At the HCM 200D, the lifestyle triggered by the alarm is
continually reactivated.
40
OM 1 (DI)
Low (0)
High (1)
OM 2 (X-10)
OFF
ON