Philips HQ C688 Bedienungsanleitung Seite 5

1 Make sure the appliance is switched off
and disconnected from the mains before
you start cleaning it.
2 Remove the comb attachment.
C
3 Open the cutting unit.
C
4 Clean the cutting unit and the inside of the
appliance with the brush supplied.
C
5 Close the cutting unit.
6 Push the cutting unit until you hear a click.
Replacement
A worn or damaged cutting unit should only be
replaced with an original Philips cutting unit.
1 Remove the old cutting unit.
C
2 Place the two lugs of the new cutting unit
into the guiding slots and push the unit
back onto the appliance.
ENGLISH
7