Gallagher M1200i Betriebsanleitung Seite 15

Gallagher 3E2488 M1200i Energizer User Manual
The alarm level can be adjusted or turned off by entering the setup mode (
). The zone which is currently getti ng setup will fl ash and will be highlighted by the
zone indicati on arrow. You can move to setup the energizer zone by pressing the
navigati on butt ons (< or >). Pressing (+ or -) increases or decreases the alarm
level. The lower the alarm level, the lower the sensiti vity. The energizer alarm can be
disabled by pressing (-) unti l the display shows (- -). To exit the setup mode
wait 10 seconds or press the setup butt on (
Earth System Voltage and Alarm
View the earth system performance by pressing the navigati on butt ons (< or >) while
the energizer is operati ng unti l the zone indicati on arrow is highlighti ng the earth
zone ( ). The earth voltage will be displayed if a reference earth stake is installed.
If there is no reference earth it will display 0.0KV. If the earth voltage rises above
the earth alarm level (default 0.5KV) the status LED will fl ash red, the earth zone
indicator will be highlighted and the internal buzzer will sound on the energizer. The
buzzer can be muted by pressing any key on the controller.
The alarm level can be adjusted or turned off by entering the setup mode (
The zone which is currently getti ng setup will fl ash and will be highlighted by the
zone indicati on arrow. You can move to setup the earth zone by pressing the
navigati on butt ons (< or >). Pressing (+ or -) increases or decreases the alarm level.
Increasing the earth alarm level reduces sensiti vity. The earth alarm can be
disabled by pressing (-) unti l the display shows (- -). To exit the setup mode wait
10 seconds or press the setup butt on (
Controller showing the energizer alarm setup at 3.0KV
).
).
).
15