Understanding Your M1200I Energizer Controller - Gallagher M1200i Betriebsanleitung

UNDERSTANDING YOUR M1200i ENERGIZER
CONTROLLER
Output Current
Indicates how hard the energizer is working
Status LED
Provides quick
indicati on of the
fence status
Zone
Indicators
Displays which
zones are
operati ng and if
they are in alarm
Setti ngs butt ons
Change alarm points and
energizer output voltage
Status LED
Green
Red
Flashing Red
Quickscan Bargraph
The Quickscan bargraph gives quick visual indicati on of the energizer output voltage.
Each bar illuminated represents approximately 1KV output.
Green Segments
Yellow Segments
Red Segments
12
Gallagher 3E2488 M1200i Energizer User Manual
Output Voltage
Shows fence, earth or alarm controller
voltage of selected zone.
Standby butt on
Turns the energizer pulses
on and off
The energizer and fence are operati ng normally
The energizer has detected a fault. Check the LCD screen to
determine where the problem is.
The energizer output voltage is low.
Your fence is performing well. No att enti on is required.
Your fence is under some load but is sti ll delivering an
eff ecti ve shock.
Your fence is under heavy load and requires maintenance.
Quickscan
Bargraph
Gives fast visual
indicati on of fence
voltage
Zone Indicati on
Arrow
Highlights which
zone is being shown
on the main display
Navigati on Butt ons
View fence / earth / alarm
zones to see energizer
performance