SATO DR308e Kurzanleitung Seite 17

5 Attach the guide plates (extension label guides).
6 Using the boss attachment positions given in the
following table as a guide, attach the boss and
then fasten it in place with the screw.
Boss attachment position
Attachment hole 1
Attachment hole 2
Attachment hole 3
Boss
Roll media supply spindle
7 Load the paper.
Push the roll firmly toward the inside of the printer until it
touches the back of the spindle.
Paper width
Up to 50 mm
50 mm to 80 mm
Not used
3 2 1
17