Oregon Scientific RAR502X Bedienungsanleitung Seite 6

The battery icon may appear in the following
areas:
AREA
Main unit
Main unit batteries low
environment area
Remote sensor Remote sensor batteries
environment area low
NOTE
We recommend that you use alkaline batteries with
•
this product for longer usage and lithium batteries in
temperatures below freezing.
Batteries should not be exposed to excessive heat
•
such as sunshine or fire.
SYNCHRONISING AND PLACING SENSORS
The main unit will automatically search for new
sensor reset within the last 30 minutes. If unit failed to
synchronise with remote sensor, reset both the main
unit and sensor or try selecting a different channel, then
reinstall the batteries and press TEST.
The remote sensor reception icons will show the following
status:
MEANING
4
ICONS
Main unit is searching
f o r s e n s o r ( s ) , t i m e
interval (4 minutes)
A sensor has been
found and logged on
(normal working model)
No sensor found
and "--.-"
Place the remote sensor within 100 m (328 ft) from the
main unit.
TIP
When placing sensors, remember the intended
•
location for each sensor. Refer to channel switch
position (1, 2, 3) and match with channel icon
displayed directly above name tag.
The transmission range may vary depending on
•
many factors. You may need to experiment with
various locations to get the best results.
For best results:
Place the sensor out of direct sunlight and moisture.
•
Position the sensor so that it faces the main unit,
•
minimizing obstructions such as doors, walls and
furniture.
Place the sensor in a location with a clear view to
•
the sky, away from metallic / electronic objects.
MEANING