Märklin 78100 Handbuch Seite 3

Function
This computerised indicator unit is only suitable as
an additional item for the Märklin H0 static roller test
stand (78100). The device can take the following
measurements:
1. Current speed of the model. The unit can display
the actual speed of the model or the equivalent
speed of the train on which it is modelled.
The display is in kilometres per hour (km/h),
miles per hour (mph) or metres per second (m/s).
2. Display of the maximum speed in a measurement
cycle.
3. Display of the minimum speed in a measurement
cycle.
4. Display of the period that the model has been
running on the static roller test stand
5. Display of the distance covered by the model
on the static roller test stand.
The device comprises a measuring unit, with a fixed
connection via a cable to a pair of rollers with an
integrated sensor. This pair of rollers must be installed
for the measurements on the static roller test stand
and used with a powered locomotive axle.
The power supply to the computer meter is from
3 batteries or round cell type storage batteries
(size LR6-AA). Batteries or storage batteries are
not included in the delivery scope.
The device should only be operated in dry, closed
rooms. It must be protected against water splashes.
The device is a measuring instrument and not a toy!
It is designed for and must only be used for calcula-
ting various values to be measured on the Märklin H0
static roller test stand.
3