Troubleshooting - Beper LOT 2013-120 Betriebsanleitung

Arm blood pressure monitor Use Instructions

Troubleshooting

PROBLEM
Blood pressure results are not
within typical range
" Err" displayed
Blood Pressure Information
Blood Pressure
Blood pressure is the force of blood pushing against the walls of arteries. It is typically measured in
millimetres of mercury (mmHg.) Systolic blood pressure is the maximum force exerted against blood
vessel walls each time the heart beats. Diastolic blood pressure is the force exerted on blood vessels
when the heart is resting between beats.
An individual's blood pressure frequently changes throughout the course of a day.
Excitement and tension can cause blood pressure to rise, while drinking alcohol and bathing can
lower blood pressure. Certain hormones like adrenaline (which your body releases under stress) can
cause blood vessels to constrict, leading to a rise in blood pressure.
If these measuring numbers become too high, it means the heart is working harder than it should.
WHO Blood Pressure Classification Indicator
The BP-1318 is equipped with a classification indicator based on established guidelines from the
World Health Organization. The chart below (color coded on monitor unit) indicates test results.
CAUSE
Cuff is too tight or not properly
positioned on the arm
Inaccurate test results due to
body movement or monitor
movement
Cuff fails to inflate properly
Improper operation
Pressurization is over
300mmHg
22
SOLUTION
Firmly reposition cuff approxi-
mately above the elbow joint (
See Page 12)
Sit in a relaxed position with
arm placed near heart. Avoid
speaking or moving body
parts while testing. Make
sure the monitor unit is
placed in a stationary position
throughout the testing period.
( See Page 7)
Make sure hose is properly
fastened to cuff and monitor
unit
Read user manual carefully
and re-test properly.
Read user manual carefully
and re-test properly.