Printer Settings - Epson LX-300 Ergänzungen Zum Benutzerhandbuch

Please update your User's Guide with the following information.
The following functions have been added to your printer:
o
More page length settings, including 5.5, 7, 17, 14, 8, 6, 4, 3.5, and
3 inches. (See Table H.)
®
o
IBM 2380 printer emulation. Your printer can now emulate an
IBM 2380 printer. All the commands available on an IBM 2380
printer are available in this mode, except one: Define
User-Defined Characters (ESC=) NLQ mode. Draft mode is
supported. (See Table P.)
o
Auto carriage return. (See Table Q.)
The table below lists the additional printer settings that you can
change from the control panel. Underlined options indicate the
factory default settings that take effect when the printer is initialized.
(Some factory default settings may vary by country.)

Printer settings

Function
Page length
Software
Auto carriage return
The following settings have been added to Table B on page 2-21 of
your User's Guide.
Table B
FONT 1 FONT 2
light light
N
F
F = flashing, N = on
User's Guide Update
Options
11, 12, 8.5, 70/6 (A4), 5.5, 7, 17, 14,
8, 6, 4, 3.5, and 3 inches
ESC/P, IBM 2380
On, Off
PAUSE
light
N F
N F
Setting
Software
Auto carriage return
Go to
Submenu
Table P
Table Q