Yamaha MusicCast VINYL 500 Bedienungsanleitung Seite 16

|
Getting ready Assembly
4
Align the round hole of the platter with the pulley.
5
Use your finger to hook the belt onto the pulley.
Take care that the belt is not twisted. After hooking the belt onto the
pulley, rotate the platter several times to ensure that the belt is smoothly
in place.
Pulley
6
Place the platter sheet on the platter.
16
En
7
Attach the counter weight to the tone arm.
With the markings on the counter weight facing you, slide it onto the
back end of the tone arm.
8
Attach the head shell to the tone arm.
Insert the head shell into the front end of the tone arm, and turn the lock
nut to secure it.
Lock nut